Aquabot Pool Rover S2 50 Automatic Pool Cleaner Vacuum From InTheSwim.com

Aquabot Pool Rover S2-50 Automatic Pool Cleaner

Aquabot Pool Rover S2-50 Automatic Pool Cleaner

Aquabot Pool Rover S2-50 Automatic Pool Cleaner is rated 3.9 out of 5 by 24.

Item # E1601

Now Only! $399.99 Was ~~$444.99~~

Aquabot Pool Rover S2-50 Automatic Pool Cleaner Does the Dirty Work for You

The Aquabot Pool Rover automatically cleans up small and big debris like leaves, dirt, algae and even small pebbles in your pool. The debris is deposited into an onboard large capacity bag that is easily cleaned out when the cleaning is done. The Pool Rover navigates itself around small obstacles in in-ground pools and will also work in flat-bottomed and dished-out above ground pools. read more

Product Description
Customer Review
FAQS
TROUBLESHOOTING

A pair of 10-inch scrubbers on the Aquabot Pool Rover S2-50 automatic pool cleaner scrubs away stubborn dirt. Customizable intake ports increase suction velocity, catching even smaller particles than most other swimming pool cleaners, and vacuuming nearly any pool in 1 hour or less. NeverStuck™ rollers enable the Pool Rover to clean over raised main drains and across imperfect pool bottoms.

Aquabot Pool Rover can be used in above ground and in-ground pools up to 40 ft. long
Adjustable suction ports increase vacuum velocity to pick up more, smaller particles
Dirt and debris gets caught in on-board filter bags that are easy to empty
10-inch fixed brushes on front and rear scrub pool surfaces
Powered by 50 ft. power cable that plugs into ordinary 110V outlet
1 Year warranty

Rated 5 out of 5 by Matt from Nice Great cleaner, works well, not too expensive. This cleaner has done a wonderful job of helping keep my pool clean. I have a gunite pool and a sand filteration system, this makes for a bit of extra dirt/dust on the pool floor. The filter trap isn't huge, but it does a good job of keeping all of the unwanted material in. It's easy to clean out with a garden hose, and the automatic shut off makes for easy maintenance. Great product.

Date published: 2019-04-30

Rated 4 out of 5 by Don K from Works great I purchased this so I didn’t have to use my pump and filter, it works like it’s supposed to and is easy to clean.

Date published: 2018-07-31

Rated 5 out of 5 by Drewdds from I wish I would have bought this product years ago.

Date published: 2017-10-01

Rated 4 out of 5 by Fred from Love it! Bought this a month ago, great hands free pool vacuuming!

Date published: 2017-07-30

Rated 5 out of 5 by Linda from My aquabot pool Rover S2-50 is amazing! I love this vacuum. I can't believe how much it picks up. Not only debris, but if there is any algea, it gets that too! I use it once a week and absolutely love it. It does stop sometime in the middle of the pool, or keeps going in same direction,but directed. I just adjust the axle pins and it's good to go! Great product. Go Rover!

Date published: 2017-07-18

Rated 5 out of 5 by Tammy from I love this Pool Rover! This year both our leaf cover and winter cover split so all the sludge that was on top emptied out into our pool. It was gross to say the least. I emptied the pool to about a quarter of the way up so that I could get in there and try to "shovel" the sludge out. I spent over 4 hours trying to do that and I felt like I wasn't getting anywhere. A friend mentioned this product and while I was a little hesitant, it worked miracles! I had to run it about 4-5 times (remember I had a lot of sludge at the bottom) but after that, pretty much everything was picked up. Filled the pool and we were ready to go within a few days. I have used it twice more since then for a quick clean up and I still love it. Does all the work for me so I can just lay in the pool and relax!

Date published: 2017-07-14

Rated 3 out of 5 by Dave from Cheap bags Product works well,except for the bags. The bags are so cheap that there is a hole in both after only a few uses.

Date published: 2017-07-11

Rated 1 out of 5 by Chris from Frustrating waste of money This is my third automatic pool cleaner. (My experience, they last about three seasons.) My first two were Aquabot Pool Rover T Jr. and I loved them. I decided to "upgrade" to this model last year. What a mistake. The body of the cleaner is lightweight - wherein lies the problem. The cleaner has one set of wheels that slides, moving it straight in one direction, and on a slight curve in the reverse direction. The body is so lightweight, there is not enough friction on the pool bottom to slide the wheels - so the cleaner spends all it's time moving back and forth in the same path. Our solution was to put a brick inside the body (literally). This helped, but even with the brick, it is not as good at cleaning the entire pool as my previous bots. I have to keep an eye on it and occasionally push it in a different direction or one half of the pool will be cleaned excessively, and the other half not touched. (the number of times I have found it running circles around the parameter of the pool... ) Can't wait for it to die so I can replace it.

Date published: 2017-06-15

Aquabot Pool Rover S2-50 Automatic Pool Cleaner Reviews - page 2

What size pools will this cleaner cover?

- Above and In-ground pools up to 40 feet in length

How long is the cord?

- The cord is 50 feet long and made of rubber over Kevlar

What surfaces will this cleaner work on?

- Vinyl, gunite/concrete, fiberglass, tile

Will it clean the walls?

- If there is a curved transition with a minimum of 6” for the radius, the cleaner will climb the walls.

How many gallons per minute will it clean?

- 80 gallons per minute

Moves slowly and does not seem to vacuum

Make sure filter bag is clean
Make sure suction ports are not clogged

LED light are blinking on power supply

See if filter bag is stuck in motor screen
Make sure impeller is not stuck

Floating cable has coiled

Change axel set up. Cleaner might be making too many turns in one direction
Let tangled cable lay stretched out in the sun

Unit does not suck up debris

Make sure impeller is not stuck
Adjust suction ports on bottom of cleaner
Make sure filter bag is clean

Unit not cleaning all of pool

Change axle position
Start the cleaner in shallow end always
Select right setting on power supply for large or small pools