Properly maintaining the water chemistry of your swimming pool is possibly the most important aspect of pool care. Having the proper water chemistry makes your swimming pool water safer and cleaner and can even save you money. Chlorine is obviously one of the key chemicals to maintaining your pool water and 3 inch chlorine tablets have quickly become the first choice for pool owners. Because they are thicker than other pool chlorine tablets, 3 inch tablets dissolve slowly and protect your pool water for longer. Moreover, 3 inch chlorine tablets are the ideal size for your floaters, skimmers, or automatic feeders.
At In The Swim, you’ll find top of the line swimming pool chlorine tablets that are effective and easy to use. 3 inch pool chlorine tablets can be put into the skimmer for inground pools and will help to maintain the chemical and chlorine level of your pool. Essentially, water chlorine tablets are dissolved into your swimming pool to kill bacteria and other organic contaminants. Choosing the right swimming pool chlorine tablets is therefore a very important decision. To keep your pool water safe for swimmers and also maintaining the clarity of water is best achieved with 3 inch chlorine tablets. Simply add the tablets to your pool water with an automatic feeder and you’ll be sure to have the best pool water possible. Chlorine tablets for pools are efficient and highly effective so you can rest easy knowing that your family will be safe from bacteria and other organic contaminants. Guardex®, Bioguard®, Aquabrome®, Polysheen®, BurnOut®, Burnout 35®, Softswim®, Pool Magnet®, Chlorite®, Algae All 60 and MSA Algaecide are registered trademarks of BioLab, Inc. Pace® is a registered trademark of Arch Chemicals. In The Swim® is not affiliated with them and does not carry their products. The use of Sun®, Guardex®, Bioguard®, Pace®, and Leslies and their logos is for comparison purposes only.
– If chlorine seems ineffective make sure the dispensing source of the chlorine is getting proper water flow to dissolve the chlorine. For example making sure water level is correct in the pool, making sure the floater has proper ventilation, and that the automatic feeders dial is set correctly. If chlorine still seems to be ineffective check the stabilizer also known as cyanuric acid. The correct level for stabilizer is 30-60 ppm. If the stabilizer is too low the chlorine will be used up faster making it appear that the chlorine is not effective. If the stabilizer level is too high it will slow down the oxidizing process and render the chlorine less effective. This must be compensated for by using a higher concentration of chlorine in the pool water.
– If you believe the chlorine is defective/ineffective, you can test it by scraping a small amount of tablet into a glass of tap water. (Do not use pool water.) Dissolve and test as usual.