America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    Kreepy Krauly Legend

    Kreepy Krauly® Legend® - Pressure Side In-Ground Pool Cleaner

    The Kreepy Krauly® Legend® pressure-side cleaner features a highly efficient booster pump (sold separately) for optimum power and unimpeded surface skimming, plus a large intake throat to handle large and small debris.


    • Front-wheel drive for maximum traction on inclined surfaces for total pool coverage
    • Four wheel design prevents tipping (common with 3 wheel cleaners) for uninterrupted and unattended performance
    • Large intake throat and high-capacity bag handle large debris with ease
    • Available in Grey/White
    • Cleans most pools in just 1-3 hours
    • Uses a highly efficient booster pump (sold separately)
    • 1 Year Warranty

    Rebate Available

    read more
      • Item: # E1460 Kreepy Krauly Legend $499.99
        EZ Pay options available! Call 800-288-7946 for details!
      • Item: # E1475 Waterway Universal Pressure Cleaner Booster Pump $279.99
      • Product Description
      • Customer Review
      • FAQS
      • MORE INFO

      • Large intake throat easily captures small and large debris 
      • Front-wheel drive, steady-grip traction and four-wheel design for maximum control on inclined surfaces for uninterrupted pool coverage 
      • Sweep hose removes debris from hard-to-reach corners 
      • Heavy-duty, large-capacity collection bag extends time between cleanings

      Is this for in-ground or above-ground pools?
      - This cleaner is only for use in in-ground pools.
      How long does this take to clean the pool?
      - Approx. 1-3 hours
      Where in the pool does this cleaner hook up?
      - It attaches to the return line.

      Legend doesn’t move or moves sluggishly or hangs up on steps

      • Be sure filter pump and booster pump are on and working properly. (You may need to clean your pool filter system).
      • Check the Wall Fitting screen for debris and rinse clean.
      • Check wheel RPM,
      • Determine if the Back-Up Valve is cycling. (Hold the valve out of the water and the jet should come on for approx. 30 seconds and shut off for approx. 3 minutes and 30 seconds.)
      • Check all the Hose connections and Swivels for leaks that can cause loss of water pressure.
      • Check debris that may be jammed in the gear teeth on one of the front drive wheels. Gently rotate the front wheels backward to dislodge debris.

      Legend falling over or lying on its side.

      • This usually indicates the bag needs to be emptied.
      • Check to see if the ballast float (EA20) is leaking by checking if there is water inside. Unscrew by pulling back while turning counter-clockwise. When it comes off, shake it and listen for water in the float.

      Legend will not back up.

      • Determine if the Back-Up Valve is cycling. (Hold the valve out of the water and the jet should come on for approx. 30 seconds, and shut off for approx. 3 minutes and 30 seconds).
      • Check the wheel RPM, (see page 14).
      • Empty the debris bag if full or half full.

      Legend will not climb.

      • Even if your pool doesn't show algae you still need to brush the sides of the pool wall.
      • Check the wheel RPM, (see page 14).
      • Reposition the Thrust Jet. Loosen the two screws to adjust the Thrust Jet,(see page 13).
      • A Reminder: The climbing ability of the Legend® is dependent on the pool's shape and available water pressure. It will climb better in pools without sharp angles or curves in the transition from the pool floor to the pool wall.

      Hoses tangling.

      • Check the length of the Feed Hose, they may be too long,
      • Check to see that the Feed Hose is floating on top of surface. Check hose floats for even spacing.
      • Twist the Hose Swivels to see if they spin freely and replace any that will not.
      • Lay out the Feed Hose straight in the full sun to remove any memory.

      Sweep Hose is sucked into the cleaner.

      • Adjust the Sweep Hose using the Adjustment Screw located on the bottom of the Swivel Mast and just below the upper Thrust Jet. Turn Adjustment Screw clockwise until the Sweep Hose is in a gentle sweeping motion.

      Booster Pump very noisy.

      • Make sure Wall Fitting is mounted in pool wall correctly.
      • Make sure Pool Filtration system is working properly.
      • Contact your local Pool Professional - possible Booster Pump problem

      Sweep Hose breaks water surface and sprays nearby windows, patio decks and bystanders.

      • Adjust Sweep Hose to a gentle sweeping motion.
      • Add optional Sweep Hose weight

      You May Also Like...