America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 06828 Fairfield Change Location

To Fairfield Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    JimmyBench Inground Pool Ladder Conversion Kit

    The original JimmyBench was designed to upgrade or replace and improve upon your standard pool ladder. The JimmyBench converts your ordinary pool ladder to a swim up bench that provides a comfortable seat and still meets all codes as a safe egress from your pool! The JimmyBench has been carefully designed to fit inside the existing pool ladder rails when the rails are rotated in an outward direction. To make sure that the JimmyBench will work with your existing pool ladder anchor points, measure your existing pool ladder anchors. The JimmyBench was designed to work with most standard stainless-steel or Saftron ladders that have the rails set between 19 and 20 inches apart.  The JimmyBench, when installed, is significantly wider than the original pool ladder so you will need to make sure that the pool ladder is far enough away from the corner of your pool to allow for the increase in the width. The JimmyBench is wide enough to accommodate 2 adults comfortably and is capable of holding up to 400 lbs.

    Note: Rails are not included with the JimmyBench Conversion Kit

    read more
      • Item: # B8300 JimmyBench Conversion Kit - White $299.99
      • Item: # B8302 JimmyBench Conversion Kit - Gray $299.99
      • Item: # B8304 JimmyBench Conversion Kit - Granite $299.99
      • Product Description
      • Customer Review
      • MORE INFO

      • The JimmyBench has been designed specifically for straight-walled pools.  The bench may not fit properly on curved-wall or round pools. 
      • All hardware that was used with the original ladder installation should be discarded. Only the supplied new hardware should be used for assembly

      Tools Required 
      • 9/16” Wrench or Socket (commonly used nut size)
      • 1/2” Wrench or Socket
      • Pliers