America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Menu
Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 20149 Ashburn Change Location

To Ashburn Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    Fine Mesh Winter Pool Cover 24 ft Round

    24 Ft Round Fine Mesh Winter Pool Cover Solves Messy Winter Pool Woes

    Mesh swimming pool covers are designed to protect your pool from falling debris such as twigs and leaves while letting rain water and snow melt through into your pool water. This helps make your spring opening much easier, quicker and less expensive. This mesh winter cover is perfect for people in climates with a lot of precipitation since rain and snow will not accumulate on the cover, eliminating the need for a cover pump as well.

    read more
      • Item: # W3815 24' Round Pool / 27' Round Cover $101.99
        Note: This cover does not include clips.
      • Item: # W3816 24' Round Pool / 27' Round Cover / 40 Clips $123.97
      • Product Description
      • Customer Review
      • MORE INFO

      The 24 ft round fine mesh winter pool cover blocks sunlight so algae won’t grow in your pool when it’s covered. Some fine silt may filter into your pool, but your water stays fresh and the silt is easily vacuumed out in the spring.

      • Mesh swimming pool cover allows rain and snow water to filter through, protects pool from damaging large debris
      • No need for a pool cover pump
      • Dark cover blocks sunlight preventing algae growth
      • Helps make spring opening easier, quicker
      • 3 Year limited warranty, 1 year full warranty

      Installation Tips
      5 THINGS TO REMEMBER WHEN INSTALLING YOUR WINTER COVER

      1. Be sure to buy the right size cover for your pool. You should not stretch your cover across the pool in an attempt to make it fit. Refer to the diagram below.


      2. Covers from In The Swim are made to have rain water accumulate on top of them. This water will not damage your cover. Excessive water can be periodically pumped from the cover, but be sure to leave approximately 1 inch of water to protect the cover from wind damage. Be sure not to place the pump on a seam when draining water, as this will cause water from your pool to be drained.

      3. In The Swim covers will accommodate a maximum 18 inch water drop below the top edge of your pool. If you normally drop your cover more than 18 inches, you should order a larger size cover.

      4. Do not use bricks or sharp blocks to weigh your cover down. In The Swim recommends using water tubes or aqua blocks for in-ground pools and cover clips or wall bags for above-ground pools.

      5. If you tie your cover to a fence or other permanent structure, be sure to use a flexible bungie cord. This will allow the cover to shift as snow and ice accumulate without pulling out the corner tabs or straps. Water tubes, aqua blocks, cover clips or wall bags should still be used.