America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 06828 Fairfield Change Location

To Fairfield Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    Fine Mesh Winter Pool Cover 15 ft Round

    Keep Water from Gathering on Your Pool Cover

    Ideal for above-ground pools in areas with a lot of precipitation, the fine mesh winter pool cover lets water and melted snow seep through, preventing it from gathering on your winter cover and potentially causing damage and a soupy mess. This cover eliminates the need for a cover pump and the need to remove water from the cover’s surface while also protecting your pool from large debris.

    This fine mesh cover has a tightly woven design that will prevent all but fine silt from getting into your pool — to remove the silt, simply vacuum it off the pool bottom when you open the pool in the spring. The cover effectively blocks sunlight to prevent algae growth, and it will leave larger debris and leaves dry on the cover’s surface, making it easy to remove or possible for the debris to blow off by itself.

    Cover Clips
    These handy clips help secure your winter cover to the top rail of your pool and prevent wind from getting under your cover. Cover Clips are not for use with Intex or other portable pools. Cover clips fit most top rails, steel or resin aboveground pools.

    read more
      • Item: # W3800 15' Round Pool / 18' Round Cover $51.99
        Note: This cover does not include clips.
      • Item: # W3801 15' Round Pool / 18' Round Cover/ 25 Clips $63.47
      • Product Description
      • Customer Review
      • MORE INFO

      • Fine Mesh Winter Pool Cover fits 15-ft. round above-ground pools
      • Woven mesh design lets water drain through to prevent damage to winter cover
      • Great for pools in areas with a lot of precipitation
      • Keeps pool water clean during winter months
      • Eliminates the need for a cover pump
      • Keeps all but fine silt out of your pool
      • To remove fine silt, simply vacuum off pool floor in spring
      • Blocks sunlight to prevent algae growth
      • Lets larger debris dry on cover’s surface, making it lightweight and easier to remove
      • Can be purchased by itself or with 25 clips to help secure cover in place
      • Save up to $8 on clips when bought together with this winter cover
      • 3-year limited warranty; 1-year full warranty

      Installation Tips

      1. Be sure to buy the right size cover for your pool. You should not stretch your cover across the pool in an attempt to make it fit. Refer to the diagram below.

      2. Covers from In The Swim are made to have rain water accumulate on top of them. This water will not damage your cover. Excessive water can be periodically pumped from the cover, but be sure to leave approximately 1 inch of water to protect the cover from wind damage. Be sure not to place the pump on a seam when draining water, as this will cause water from your pool to be drained.

      3. In The Swim covers will accommodate a maximum 18 inch water drop below the top edge of your pool. If you normally drop your cover more than 18 inches, you should order a larger size cover.

      4. Do not use bricks or sharp blocks to weigh your cover down. In The Swim recommends using water tubes or aqua blocks for in-ground pools and cover clips or wall bags for above-ground pools.

      5. If you tie your cover to a fence or other permanent structure, be sure to use a flexible bungie cord. This will allow the cover to shift as snow and ice accumulate without pulling out the corner tabs or straps. Water tubes, aqua blocks, cover clips or wall bags should still be used.