America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 06828 Fairfield Change Location

To Fairfield Change
Celebrating 35+ Years!
Source / Promo Code:I8TKBAZVEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:I8TKBAZV Edit

    Thank you for shopping with In The Swim!

    Aquabot Pool Rover S2-50 Automatic Pool Cleaner

    Item # E1601
    Out of Stock

    Aquabot Pool Rover S2-50 Automatic Pool Cleaner Does the Dirty Work for You

    The Aquabot Pool Rover automatically cleans up small and big debris like leaves, dirt, algae and even small pebbles in your pool. The debris is deposited into an onboard large capacity bag that is easily cleaned out when the cleaning is done. The Pool Rover navigates itself around small obstacles in in-ground pools and will also work in flat-bottomed and dished-out above ground pools. read more

    • Product Description
    • Customer Review
    • FAQS

    A pair of 10-inch scrubbers on the Aquabot Pool Rover S2-50 automatic pool cleaner scrubs away stubborn dirt. Customizable intake ports increase suction velocity, catching even smaller particles than most other swimming pool cleaners, and vacuuming nearly any pool in 1 hour or less. NeverStuck™ rollers enable the Pool Rover to clean over raised main drains and across imperfect pool bottoms.

    • Aquabot Pool Rover can be used in above ground and in-ground pools up to 40 ft. long
    • Adjustable suction ports increase vacuum velocity to pick up more, smaller particles
    • Dirt and debris gets caught in on-board filter bags that are easy to empty
    • 10-inch fixed brushes on front and rear scrub pool surfaces
    • Powered by 50 ft. power cable that plugs into ordinary 110V outlet
    • 1 Year warranty

    What size pools will this cleaner cover?
    - Above and In-ground pools up to 40 feet in length
    How long is the cord?
    - The cord is 50 feet long and made of rubber over Kevlar
    What surfaces will this cleaner work on?
    - Vinyl, gunite/concrete, fiberglass, tile
    Will it clean the walls?
    - If there is a curved transition with a minimum of 6” for the radius, the cleaner will climb the walls.
    How many gallons per minute will it clean?
    - 80 gallons per minute

    Moves slowly and does not seem to vacuum

    • Make sure filter bag is clean
    • Make sure suction ports are not clogged

    LED light are blinking on power supply

    • See if filter bag is stuck in motor screen
    • Make sure impeller is not stuck

    Floating cable has coiled

    • Change axel set up. Cleaner might be making too many turns in one direction
    • Let tangled cable lay stretched out in the sun

    Unit does not suck up debris

    • Make sure impeller is not stuck
    • Adjust suction ports on bottom of cleaner
    • Make sure filter bag is clean 

    Unit not cleaning all of pool

    • Change axle position
    • Start the cleaner in shallow end always
    • Select right setting on power supply for large or small pools