America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 02139 Cambridge Change Location

To Cambridge Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    24 ft Round Pool Expandable Overlap Liners

    Expandable Liners For Above Ground Pools Perfect For Deep Middles

    For pools that have a deeper, dished-out bottom and needing a new liner that fits properly, the 24 t. round expandable overlap pool liner fills your need. Available for above ground pools with either a 60-inch or 72-inch center depth, this expandable pool liner eliminates the issue of find a liner that doesn’t need to be stretched or is too big creating sags.

    The expandable liners for above ground pools are constructed of heavy-duty 20 gauge virgin vinyl. Its rugged double welded seams resist pulling and separation, while the material itself is impervious to harmful U.V. rays and harsh pool chemicals. You can choose between a solid pattern throughout the expandable liner or one with a swirl floor pattern.

    • Expandable pool liner ideal for above ground pools with dished-out centers
    • Pool liners are not wrinkle free but offer economical, easier way to cover a deep middle pool
    • Durable 20 gauge virgin vinyl will not fade in the sun or from pool chemicals
    • Fits 24 ft. pools with 60 in. or 72 in. depths in the middle
    • Rugged double welded seams will not come apart or leak
    • Available with either solid blue pattern throughout or with swirl floor pattern
    • Comes with a 15 year limited warranty
      • Item: # L2020A Solid Blue - 60-in. Depth
        Out of Stock
      • Item: # L2120A Solid Blue - 72-in. Depth
        Out of Stock
      • Item: # L2020B Swirl Floor - 60-in. Depth
        Out of Stock
      • Item: # L2120B Swirl Floor - 72-in. Depth
        Out of Stock
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      Technical Specifications:

    • L2120 will fit pools that are 24’ round and dished out to 72” in the center and L2020 will fit pools that are 24' round and dished out to 60" in the center.
    • Overlap style liner.
    • Made from virgin vinyl.
    • Provide maximum protection from the sun's damaging U.V. rays.
    • 20 Gauge
    • Rugged double welded seams.

    • How can I find a leak in my liner?
      – Take some food coloring and go to where you think there might be a leak, if so the food coloring will be drawn to it.

      How do I know if your liners will fit my pool?
      – Our liners have a standard bead.

      What is the lowest temperature to install a liner?
      – 60 degrees for a beaded liner and 50 degrees for an overlap liner.

      What is the measurement on an expandable liner?
      – The expandable pool liners can accommodate a pool that dishes out in the center 60” or 72” deep. If your pool goes from shallow to deep you would need to fill out a 6-01 measuring form.

      Can I stretch a liner to fit a larger size pool?
      – No, you have to match up your pool size with the same size liner. We do have custom above ground liners to accommodate any size above ground pool.


    • Wrinkling – Some wrinkling should be expected when installing expandable liners. More wrinkling may occur if you have a safety ledge or your dished out depth is less than the liner size allows for.
    • For use with standard hard side overlap style pools with dished out centers.
    • Not for use with deep end pools.
    • Do not order without knowing exact center depth measurement.
    • Outside temperature must be a minimum of 70 degrees for proper installation.
    • Install liner with the smooth side up.
    • Coping strips are required to hold liner to pool wall.
    • Do not cut liner for inlets and light fixtures until the water reaches 3” below the opening to be cut.

    • Installation Instructions


      • 2” gray duct tape with non-asphalted adhesive
      • screwdriver
      • garden hose
      • sharp nail or ice pick
      • industrial vacuum or household vacuum (filter bag removed)
      • tamping tool
      • masking tape
      • utility knife

      WARNING: Liner should be stored at room temperature for at least 72 hours prior to installation.


      1. Spread a 2” layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use “Soft Step” Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.
      2. With the brick sand, make a curved cove about 4” high and 4” wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used.


      1. Place the closed liner carton in the center of the pool.
      2. Open the carton. Do NOT use anything sharp to open the carton.
      3. Unfold the liner and spread it out in the sun to warm up.
      4. Inspect all seams and surfaces for holes.
      5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.
      6. Smooth out all wrinkles in the bottom.
      7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.
      8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.
      9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3” below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.
      10. Proceed filling pool until water reaches desired level.


      1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.
      2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.
      3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.

      Warranty Products