The Pool Rover T robotic pool cleaner is an easy-to-use, lightweight machine that can clean a 24-foot found above ground swimming pool in less than an hour. The robotic pool vacuum replaces the need of clumsy hand-held vacs attached to extension poles, and allows you to sit back and relax while it does all the work. A self-contained filtration system keeps your pool filter free from anything sucked up, and the top loading, easy to empty EZ clean bags grab particles down to 2 microns in size.
Recommended Pool Size Above-Ground Vinyl Liner Pools up to 20 ft. x 50 ft.
Cleaning Coverage Up to 5000 feet per hour
Filtration Quantity 4800 gallons per hour
Filtration Capability Down to 2 microns
Filtration Intake 2 intake valves, 1 in. x 4.5 in. each
Filtration Capacity Reusable, cleanable filter bag is 4 sq. ft. capacity
Cable 51 ft. with floating buoys
Transformer: 110 Vac to 12Ah @ 30 Vac
Pump Motor: 150 watt 28 Vac - Oil Filled
Programmable Cleaning Pattern Adjustable, precision scanning via HydroJet Directional Guidance System (patent pending)
Propulsion Jet Drive Propulsion System (JDPS) -- same principle as used in a jet ski
Unit Weight: 11 pounds
Does not pump water, move or vacuum.
Does not vacuum well or at all.
**NOTE: Use the Fine Filter bad to trap smaller debris such as algae, bacteria, sand and silt. Use the Mesh Filter bag to trap larger debris such as leaves, acorns, twigs, and pine needles.
Does not cover the entire pool.
Does not reverse direction.
Reverses before reaching the opposite end of the pool.
Waits too long at the side of the pool before reversing.
Floating cable is twisting.