In The Swim sells more winter chemical kits than any other online retailer. We carry a range of pool chemical winterizing kits to prevent algae blooms and protect your pool after winterization. Regardless of the size of your pool, we have non-chlorine pool winterizing kits to meet your needs. With our pool closing kits, your winter pool chemicals are pre-measured for the size of your pool so even the least experienced pool owner can easily winterize their pool. Plus, our winter pool kits are as affordable as they are effective so opening your pool will be as easy as it was to close the pool.
You don't have to skimp on your winter pool chemicals this year, get more bang for the buck with our low prices and fast shipping. If you find a lower priced winter pool closing kit, with as much powerful, germ-fighting efficiency as ours, check the label! Our custom designed winter pool chemical kits are designed to keep your pool and your wallet protected this winter.
Make the smart choice this autumn, buy your pool winterizing kits from In The Swim, America's #1 Direct Source for winter pool supplies!
Make sure that the pool water is cleaned, balanced before adding the winterizing kit to the water. It is recommended to close the pool when the ambient temperature is less than 65 degrees.
Follow the winterizing instructions below.
At the end of the season:
1. Clean the Pool
Clean-up next spring will be greatly reduced if the pool is thoroughly cleaned before closing it in the fall. Be sure to vacuum the bottom and skim the surface before proceeding to the next step.
2. Balance the Water
Balance the components of the pool the same way you would if you were maintaining your pool for the swimming season. All components should be within their desire ranges; add the appropriate corrective chemicals to bring levels into the required range.
3. Shock the Pool and Add Algaecide
Lithium Shock or Chlor-Free is recommended for shocking. Pool Shock can also be used, but is not recommended for vinyl liners because of the possibility of bleaching the liner In The Swim Algaecide or Algaecide 50 is recommended for preventative maintenance of algae growth over the winter months. Add the recommended dosage of algaecide and shock treatment while the pool filter is circulating the water.
4. Add an In The Swim® Non-Chlorine Winterizing Kit
To make winterizing simple and economical, we suggest one of the Winterizing Kits. Our kit comes complete with Winterizing Inhibitor, Winterizing Stain-Away, Chlor-Free Shock and a float containing a non-chlorine oxidizer. (Step #3 may be skipped if using a Winterizing Kit)
5. Lower The Water Level
Lower the water level in the pool to 4-6 inches below the skimmer. In The Swim® suggests taking all above-ground pool filter equipment indoors for the winter to prevent cracking from freezing water. In-ground pool filters require that the lines be drained, plugged and filled with anti-freeze. Be sure to follow manufacturer’s guidelines and instructions for protecting your underground pool lines.
6. Drain and Plug the Lines
(For In-Ground Pools Only!)
In-ground pools require the lines to be drained, plugged, and filled with anti-freeze. First, the valves must be closed. The next step is to drain or blow out the lines. Plug them with Winterizing Plugs. Proceed to fill the skimmer line withAnti-Freeze. In the spring, the Anti-Freeze can be vacuumed out or drained into the pool since it is a non-toxic formula. Be sure to follow manufacturer guidelines and instructions for protecting in-ground pool lines.
Place a Skimmer Guard into the skimmer to prevent costly damage from ice. TheSkimmer Guard acts as an ice compensator, and will prevent your skimmer from cracking once the rain/snow water accumulates in the skimmer.
7. Covering the Pool
Taking the time to correctly cover the pool is the single most important step to opening a clean pool in the spring.
|Average Pool Depth|
|Pool Size||5 ft.||6 ft.||7 ft.||8 ft.|
|Pool Size||48 in.||52 in.|