Delivery To Select Location

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNKEdit

    Polaris® 65
    Automatic Pool Cleaner




    • The Polaris 65 above ground pool cleaner provides automatic, efficient cleaning and eliminates the need for manual vacuuming.
    • This Polaris automatic pool cleaner will effectively remove a variety of types of debris including dirt, leaves and pebbles.
    • Will take the hassle out of pool maintenance.
    • Provides the reliability, durability, efficiency and effective cleaning that Polaris pool cleaners are known for.
    • Not for use while swimmers are in the swimming pool.
    • 8 ft. hose extensions available.
    • Vacuums pools with uneven bottoms to a depth of 5 feet.
    • These automatic pool cleaners use your pool's filtration system to direct powerful jets of water against the pool floor to loosen debris.
    • Detachable All Purpose Debris Bag trails behind and scoops up debris, leaves and twigs before they clog your filter.
    • Works on the pressure side of your pump and distributes filtered, treated water throughout your pool as it cleans.
    • Installs on most above-ground pools and includes 24 ft. of hose, enough for pools up to 24 ft. round.
    • Economically priced for remarkable value!
    • 1 Year Warranty
    • Not recommended for use on above ground pools with pumps smaller than 3/4 hp.



    read more
      • Item: # E1497 Polaris® 65 $214.99
      • Item: # ZZOD0047 All Purpose Filter Bag $25.87
      • Item: # ZZOD0051 8 ft. Hose Extension $27.35
      • Product Description
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      For fast, efficient and easy pool cleaning, the Polaris 65 automatic pool cleaner is a great solution. The Polaris 65 pool cleaner is a pressure-side cleaner designed specifically for use in above ground pools. This powerful pool vacuum will sweep and clean the sides and floor of above ground swimming pools and takes just minutes to install. The Polaris 65 automatic pool cleaner features a patented jet sweep assembly which will loosen and remove dirt and debris even from hard-to-reach places.

      By removing debris such as dirt and leaves before they can reach the pool's filter, Polaris 65 above ground pool cleaners prevent filters from clogging. This not only reduces filter cleaning by up to 80%, it also extends the overall filter lifespan. Easy to install and easy to use, Polaris 65 automatic pool cleaners eliminate the need for vacuuming by hand and provide the perfect cleaning solution for pool owners who prefer swimming in their pool rather than cleaning it.

      Technical Specifications:

    • The Polaris 65 is an above-ground pressure side cleaner.
    • Designed for all aboveground pools up to five feet deep, even those with an uneven bottom.
    • The bottom and sweeps the sides in three hours or less.
    • The Polaris cleaner uses a debris bag and comes with a 24' hose.

    • Can the Polaris 65 clean dished out pools?
      – Yes! The Polaris 65 is designed for all aboveground pools up to five feet deep, even those with an uneven bottom.

      How long will it take to clean my pool?
      – Installs in minutes. Operates with pumps and filtration systems normally found on aboveground pools and vacuums the bottom and sweeps the sides in three hours or less.

      I have an area of my pool that is hard for most cleaners to reach. Will the Polaris 65 work for me?
      – Patented jet sweep assembly blows water against the pool wall to loosen debris in hard-to-reach places and then sweeps it into an easy-to-remove filter bag.

      Does the Polaris 65 prolong the life of my filter system?
      – The unique filter bag removes debris before it reaches your pump basket or filter, therefore it does prolong the life of the filter system.

      Can I swim while the cleaner is working?
      – NO! All swimmers need to be removed from the pool before starting the Polaris 65 and never handle the cleaner while it is working.

      What kind of technical support does Polaris offer?
      – For on-line support: www.polarispool.com.
      – Or 1-800-822-7933.


    • Polaris does not clean the entire pool or runs slowly.
    • – Verify that the pressure relief valve is releasing water. If it is not, clean or backwash the pool filter.
      – Check the filter screen in the quick disconnect and clean if necessary.
      – Verify that the float hose is the proper length.
      – Remove the surface module top. With the Polaris operating, verify that the randomizer tube is moving back and forth. If it is not moving: Turn off pump, disconnect hoses, look into the mechanism and locate the filter connector inside the randomizer tube. If it is covered with debris or algae, remove the connector chamber, cylinder, and piston. Pull out the randomizer tube and clean the filter connector. If the connector is clean, replace the piston. If it is moving: Watch the randomizer ball in the mechanism. If it does not move within 2 minutes, replace the randomizer tube and piston.
      – Verify that the water pressure is between 5 and 10 psi.

    • Surface module dives under the water or leans to one side.
    • – Straighten twisted hoses.
      – Lift surface module out of the water, empty it and then shake it. If water is still heard inside, remove the top, pull out the drain plug assembly and drain the module.B – Adjust the pressure relief valve until the surface module levels off.
      – Verify that the water pressure is between 5 and 10 psi.

    • The float hose remains coiled.
    • – See “Polaris does not clean entire pool."
      – Lay the float hose out straight in the sun to remove the coils.

    • Surface module moves too fast.
    • – Adjust the pressure relief valve until the surface module slows down.
      – Verify that the water pressure is between 5 and 10 psi.

    • Bag does not stay on the pool floor.
    • – Verify that the bag has been installed correctly.
      – Check for air bubbles around the jet body assembly. This may indicate air in the plumbing lines.
      – See “Surface module moves too fast.”