Delivery To Select Location

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNKEdit

    Hayward Max-Flo XL Pool Pump



    • High-quality construction is designed for the circulation needs of in-ground pools that require high flow rates and quick turnover times.
    • This corrosion-proof pool pump provides many years of trouble-free operation.
    • Super-quiet operation.
    • Features an extra-large hair-and-lint trap with see-thru lid that's easy to open and easy to clean.
    • Must be hard wired.
    • UL listed. 115/230 volts AC.
    • 1 Year Warranty
    read more
      • Item: # E2328 3/4-HP $389.99
      • Item: # E2329 1-HP $424.99
      • Item: # E2331 1 1/2-HP $489.99
      • Item: # E2332 2-HP $529.99
      • Product Description
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      For written information, order our Information Packet located below.

      Technical Specifications:

      • Self-priming (suction lift up to 8 feet above water level)
      • Tri-Lock cam and ramp strainer cover are designed to seal with less than a quarter turn.
      • Clear strainer cover lets you see when the basket needs cleaning. Pressure testable to 50 psi MAXIMUM.
      • Large leaf holding capacity strainer basket extends time between cleanings.
      • Elevated base insures better ventilation for cooler running and protection from flooding.
      • All components are molded of corrosion-proof reinforced engineered plastic for extra durability and long life.

      Item# Model No. HP Voltage Union Connectors
      E2328 SP2305X7 3/4 115/208-230 1.5" x 2"
      E2329 SP2307X10 1 115/208-230 1.5" x 2"
      E2331 SP2310X15 1-1/2 115/208-230 1.5" x 2"
      E2332 SP2315X20 2 115/208-230 1.5" x 2"

      What size piping does The Max Flo XL have?
      – The Max Flo XL pump has 2 inch intake and discharge.

      What is the voltage on The Max Flo XL pump?
      – The Max-Flo XL pump is a 115/230 dual voltage. It comes factory wired for 230 volts, But can be rewired to 115.

      How long should I run my pump for?
      – You should run your pump for at least 8 hours a day. Although the Max-Flo XL pump is designed to be run 24 hours a day 7 days a week.

      Is the Max-Flo XL pump self-priming?
      – Yes, the pump is a self-priming pump (suction lift 8 ft above water level).

      Is this a dual speed pump?
      – No, this is a single speed pump.


      • Motor won't start:
        • Check for improper or loose connections, open switches or relays, blown circuit breakers or fuses.
        • Manually check rotation of motor shaft for free movement and lack of obstruction
      • Motor cuts out – check for:
        • Wiring, loose connections, etc.
        • Low voltage at motor (frequently caused by undersized wiring).
        • Binding and overload. (Amperage reading)
      • Motor hums, but does not start – check for:
        • Governor stuck in open position.
        • Open capacitor.
      • Motor cuts out – check for:
        • Wiring, loose connections, etc.
        • Low voltage at motor (frequently caused by undersized wiring).
        • Binding and overload. (Amperage reading)
      • Pump won't prime:
        • Make sure pump/strainer housing is filled with water and that cover gasket is clean and properly seated. Tighten hand nuts.
        • Make sure all suction and discharge valves are open and unobstructed, and that pool water level is above all suction openings.
        • Block off suction as close to pump as possible and determine if pump will develop a vacuum.
          • If pump does not develop a vacuum and pump has sufficient "priming water".
            • Tighten all bolts and fittings on suction side
            • Check voltage to make sure pump is up to speed.
            • Open pump and check for clogging or obstruction.
            • Remove and replace shaft seal.
          • If pump develops a vacuum, check for blocked suction line or strainer, or air leak in suction piping.
      • Low Flow – Generally, check for:
        • Clogged or restricted strainer or suction line; undersized pool piping.
        • Plugged or restricted discharge line of filter (high discharge gauge reading).
        • Air leak in suction (bubbles issuing from return fittings).
        • Pump operation underspeed (low voltage).
        • Plugged or restricted impeller.
      • Noisy Pump – check for:
        • Air leak in suction causing rumbling in pump.
        • Cavitation due to restricted or undersized suction line and unrestricted discharge lines. Correct suction condition or throttle discharge lines, if practical.
        • Vibration due to improper mounting, etc.
        • Foreign matter in pump housing.
        • Motor bearings made unserviceable by wear, rust, or continual overheatings.

      Pump Sizing Advice
      When sizing a replacement pump, Dr. Pool strongly suggests that you replace with the same size horsepower as your existing set-up! In most cases, up-grading horsepower shortens your filter’s expected life and voids manufacturer’s warranties.
      Product Downloads
      You May Also Like...