Delivery To Select Location

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNKEdit

    Filter Perfect

    Extend Filter Cycles, Reduce Maintenance, and Maintain Clear, Perfect Water!

    This all natural solution improves filter efficiency, lengthens cycles between filter cleaning and is compatible with Chlorine, Bromine and other alternative sanitizing systems.
    • Extend Filter cycles
    • Reduce Maintenance
    • Maintain clear, perfect water.
    • Natural enzyme based, highly concentrated deep cleaning solution
    • Perfect for soak-cleaning filter cartridges, DE grids and sand beds
    • Removes deep-set oils, grease and scum build-up for more efficient filtering.
    read more
      • Item: # Y5974 1 Liter $16.99
      • Item: # Y5975 4 x 1 Liter $58.99
      • Product Description
      • Customer Review
      • MORE INFO

      This highly concentrated, natural enzyme cleaning solution will remove deep set oils, grease and other build-up on pool & spa filters. It is very effective on cartridge elements, D.E filter grids and sand filters and is ideal for soak-cleaning.

      Directions for Use
      Filter Perfect

      Cartridge Elements or DE filter grids
      1. Remove cartridge elements or DE grids from filter tank and hose off loose material
      2. In a pail, bucket or trash container with 5-10 gallons of water, add 1L bottle of Filter Perfect
      3. Place cartridge elements or DE grids in solution and soak for a minimum of 6 hours (preferably overnight)
      4. Remove from solution and rinse thoroughly
      Note: Clean cartridge elements should be allowed to dry before re-installing

      Sand Filter
      1. Have pump running and filter in backwash mode. Suction should come primarily from skimmer, not main drain
      2. Add 1L bottle of Filter Perfect to skimmer
      3. Once contents of bottle have entered the filter, turn pump off and put valve in either close or filter position, for a minimum of 6 hours
      4. Turn pump on with filter set to backwash, run until water flows clear (Do NOT allow pump to run dry)
      5. Return filter to normal operation