1.800.288.7946

Delivery To Ashburn Edit

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Menu
Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNKEdit

    Economy Safety Pool Covers Rounded Corners with Center Step

    FEATURE-PACKED, YET VALUE-PRICED!

    • This Pool Safety Cover delivers the same heavy-duty cover quality that thousands of customers have come to depend on from In The Swim over the years, but at a more economical price!

    • The Economy Safety Pool Covers are made out of a two-ply mesh material that resists rot, mildew, sunlight and harsh chemical damage.

    • Many people use this cover year round on their swimming pool, not just as a winter pool cover.

    • Its mesh construction allows for water drainage, while keeping unwanted leaves and large debris from entering the pool, allowing for a quick and easy clean-up in the Spring.

    • Each swimming pool cover comes complete with brass screw-type anchors for concrete decks, stainless steel springs, installation tool and storage bag.

    • This cover is forest green.
    CUSTOM COVERS ARE OUR SPECIALTY!


    NEW! Instant Estimates for custom-size Economy Safety Pool Covers!
    If you don't see your pool size listed below,
    Click Here for an INSTANT ESTIMATE


    You may also click on "Measuring Form" below picture for a complete measuring form (PDF) or order an Information Packet (located near bottom of page) for a complete measuring form with instructions.

    If your swimming pool has a step section, please click on the "Step Sections" link below picture to find a cover for your pool.
      • Item: # M3632 16x32 Pool Size with 4x8 Center Step
        (18x34 Cover with Center Step)
        $1,159.99
      • Item: # M3634 18x36 Pool Size with 3x8 Center Step
        (20x38 Cover with Center Step)
        $1,309.99
      • Item: # M3636 20x40 Pool Size with 4x8 Center Step
        (22x42 Cover with Center Step)
        $1,459.99
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      Technical Specifications:

    • The Economy Safety Covers are made out of a two-ply mesh material that resists rot, mildew, sunlight and harsh chemical damage.
    • Break strength of 4,000 pounds.
    • Color is forest green.
    • Includes brass screw-type anchors, stainless steel springs, installation tool and storage bag.
    • For initial installation a ¾” drill bit and rotary hammer drill are needed.
    • ** Must meet the following criteria for safety purposes:**
    • – Rectangle pool with no step sections. Square corners or no more than a 2’ radius corner.
      – No obstructions that can not be removed within 18” of the waterline. Such as ladders, slides or diving boards.
      – Must have at least 3’ of concrete on all sides of the pool.>


      What is the color of the cover?
      – The cover is Forest Green.

      What is the break strength on this cover?
      – This cover has a break strength of 4,000 pounds.

      Is this cover ASTM rated?
      – Yes.

      How does the cover secure down to my pool?
      – Anchors are included to secure cover down. They need to be cemented into the concrete deck around the pool.

      What types of anchors are included?
      – Brass screw type anchors.

      What is included with the cover?
      – Anchoring system, stainless steel buckles and protective cover springs, installation tool, and heavy-duty storage bag are included.

      Do these covers accommodate a step section?
      – No, rectangle covers are for rectangular shaped pools and will not accommodate a step section. Covers can be purchased with a step section, either it will be in inventory or needs to be custom made.

      How do you measure a corner radius?
      – To measure a corner radius, you can use a string or chalk. Take the string or draw from the straight part of the pool both on width and length and continue it out (do not follow curve). From the point where the two meet, measure back to where the pool starts to curve. This is your corner radius. If over 2’, a measuring form must be completed.

      What happens if I don’t meet the 3 safety requirements and still purchase the cover?
      – The warranty is null and void. Manufacturer will be able to determine from wear on cover.

      Can I use a patch kit if my safety cover has a rip in it?
      – No, the cover will have to be sent in to the manufacturer to be sewn up.

      What other items are not included that I am going to need to install my safety cover?
      – A rotary hammer drill and a 3/4" drill bit to drill the anchor holes, a hammer or mallet to put the anchors in, some sore of lubricant, and some chalk to form a line where you need to install the anchors.


      Please Read Before Ordering

      PLEASE READ BEFORE ORDERING!

      Before placing an order for a Safety Pool Cover, respond to each of the following statements below to determine if you qualify for a standard size cover. Note: If you purchase a standard size cover to fit a custom pool or purchase a cover that does not accommodate your specific pool size, the warranty for the cover will be void.
      • My swimming pool is a perfect rectangle, with square corners (not rounded) and No Step Sections.
      • There is at least 3 feet of concrete deck around the entire perimeter of my pool.
      • There are no unremovable objects (slides legs, handrails, ladders, dive stand, etc.) within 12 inches of my pool's edge.


      If All of these statements are True, you can proceed to order a standard size cover.
      If Any of these statements is False, Click Below for an Instant Estimate on a custom size cover.


      If your pool has a step section, please use the links below to view covers with step sections:

      Click Here for Covers with a CENTER STEP section
      Click Here for Covers with a RIGHT STEP section
      Click Here for Covers with a LEFT STEP section.

      Custom Safety covers

      Step Sections
      DO YOU HAVE A STEP SECTION?

      Please read the following information to determine if you need to order a cover with a step section.

      Covers with step sections are required when the step section of your pool extends beyond the main rectangular shape of the pool. Please do not order a larger size rectangular cover to attempt to cover a step section. The cover will not wear properly and the warranty will be voided.

      DO I NEED A RIGHT, LEFT OR CENTER STEP?

      1. Stand at the deep end of your pool and look toward the shallow end.
      2. If your step extends to the left of your pool and the edge of the step is perfectly flush with the shallow end wall of your pool, you have a LEFT STEP (Diagram A).
      3. If your step extends to the right of your pool and the edge of the step is perfectly flush with the shallow end wall of your pool, you have a RIGHT STEP (Diagram B)
      4. If your step section is centered in the middle of the shallow end, then you have a CENTER STEP (Diagram C).


      Click Here for Covers with a RIGHT STEP section
      Click Here for Covers with a LEFT STEP section
      Click Here for Covers with a CENTER STEP section

      OFFSET STEPS
      If your right or left step section is offset more than 6 inches from the wall at the shallow end of your pool, you will need a custom cover made with an OFFSET STEP section (Diagram D & E). Likewise, if your center step is offset by more than 6 inches from the center of the shallow end wall, you will need a custom cover made with an OFFSET CENTER STEP section (Diagram F & G).



      Please do not order a larger size standard step section cover to attempt to cover an offset step section. The cover will not wear properly and the warranty will be voided.

      Please Note: The information above used to determine the step section only applies to economy safety covers. The process for determining step sections for other types of covers may vary.

      If you are confused about what type of step section you may need for your pool, please call us at 1-800-288-7946 or email us at [email protected].. prior to ordering OR you may put a message in the Customer Comments field of the checkout page and a customer service representative will contact you before processing your order.
      Measuring Form
      Express Measuring Form

      It is still recommended to order literature packet 6-01 because it contains a DVD and other useful information, but to obtain a copy of our measuring form now, please click on the link listed below. This will allow you to download and print a copy of our measurement form.

      Click Here To Download Safety Cover Measuring Form

      Once you have completed the form, there are two ways you can send us your measuring information:

      • Fax it to us at 1-800-766-5329.
      • Or mail it to the following address:
        In The Swim
        320 Industrial Drive
        West Chicago, IL 60185


      Having trouble downloading the form?
      The measurement form is a type of file called a PDF (portable document format). You need a software program called a PDF reader (for example, Adobe Acrobat Reader) to view and print our form. If you have this type of software installed on your computer, it usually will open the file automatically. If you don't have this software installed, there are many free programs available. We recommend the Adobe Acrobat Reader, available here.

      If you have any difficulties or concerns, please contact us at 1-800-288-7946 (24hours/day) or email us at [email protected].

      Warranty Year
      12-Year Warranty (2 Years Full)