Brass Anchors: Brass cover anchors fit GLI solid or mesh safety covers, (formerly known as Cantar), In The Swim, and all other brands. Threaded brass anchors are the same width as other brass cover anchors, but the threads are a slightly different size. Brass Anchors measure 13/16" diameter, and 1-5/8" tall.
Brass Anchor Flanges: For broom finished pool decks, the finishing process entrains some air bubbles into the top surface of the concrete. When installing anchors into concrete, the rotary hammer drill can hit these bubbles and cause the deck to chip slightly, around the drilled hole. Using a new, sharp drill bit can reduce this chipping, or you can use these brass escutcheon plates to hide the chipping and provide a finished look to your brass anchors.
Wood Deck Anchors: If you are installing a mesh safety cover into a wooden pool deck, the Wood Deck Anchor is recommended for the safest installation. Wood decks can rot over time, and wood anchors improve the grip onto wooden decks with a horizontal flange that spreads out the tension. Wood deck anchors include brass screws to secure the flange to your wood pool deck. To install the wood deck anchor flush with your pool deck, it is recommended to use a Forstner bit on a drill, to counter-sink the flange into the deck, so that it becomes completely flush mounted.