Delivery To Select Location

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNKEdit

    Aquabot Classic Automatic Pool Cleaner


    Aquabot's built in filtration system takes all the work out of cleaning your pool. No more dragging out and connecting vac hoses -- just plug in, drop in, and let it go to work! No need for supervision -- the Aquabot pool vacuum is pre-programmed for efficient, thorough cleaning of any size, shape, or type pool without getting hung up on ladders or steps. High-powered suction removes the finest particles of algae, bacteria, dirt debris, sand and hair from the pool's floors, steps, walls, and even the waterline! As it cleans, the Aquabot automatic pool cleaner equalizes the water temperature and chemical distribution, reducing heat and chemical costs.
    • Continuous Run Timer
    • Front and rear rotating scrubbing brushes help loosen and remove dirt and fine particles
    • 50 ft. Cable
    • Fine Filter Bag (filters down to 2 microns)
    • Power consumption: 230 Watts
    • Input electrical requirements: 120 VAC/60Hz
    • Pool to wall transition: 90 degree angle
    • Water mixing capability: 70 GPM
    • Compatible with external timer
    • 1 Year Warranty
    read more
      • Item: # E1580 Aquabot Classic $869.99
      • Item: # E1581 Aquabot Classic Turbo $1,029.99
      • Item: # ZAQP0001 Brush (single) - for vinyl or concrete pools $31.45
      • Item: # ZAQP5149 Foam Brush Assembly (Pair) $36.48
      • Item: # ZAQP0002 Drive Tracks (each) $21.65
      • Item: # ZAQP0005 Single Tan Drive Belt $8.31
      • Item: # ZAQP0003 Aquabot Filter Bag (fine) $39.56
      • Item: # ZAQP0004 Mesh Filter Bag for Aquabot $61.36
      • Product Description
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      The Aquabot automatic pool cleaner will transform your pool maintenance routine by significantly reducing the time and effort required to keep your pool sparkling clean. With its built in filtration system, the Aquabot automatic pool cleaner operates independently of your pool's filter and will vacuum up even the finest dirt and debris with its high-powered suction.

      The Aquabot automatic pool cleaner is pre-programmed for maximized cleaning efficiency and will effectively clean in-ground swimming pools of all shapes, sizes and types. With the Aquabot robotic pool cleaner working for you, you can enjoy incredible convenience as well as reduced maintenance costs.

      Aquabot Turbo comes with extra features designed to cover your in-ground pool bottom as well as the walls and waterline a little more efficiently. An adjustable timer allows you to clean for a little longer and an extended cable gets you the length you need for longer pools.

      • Includes digital power supply (adjustable 1-7 hours)
      • 60 ft. Cable

      Technical Specifications:

      • Quantity of water filtered = 4000 gals. per hour.

      • Cleaning Coverage = 3500 sq. ft. per hour.

      • Electrical Cord Length = 51 ft.

      • Unit Weight = 16.9 lbs.

      • Wattage = 140 Watts.

      • Operating Cost = Less than 25 cents per day.

      • Electrical Plug = 110v/60Hz or 230V/50Hz.

      • Filtration-Micron Rating = Self contained 2 microns.

      • Scrubbing Ability = Heavy duty.

      • Shipping Dimensions = 17.5 in. x 17.5 in x 19.5 in.

      • Shipping Weight = 36 lbs.

      How do you hook up the AQUABOT?
      – This cleaner comes with a Power Supply Box that has a 3-prong plug. The plug gets plugged into a ground outlet. The cleaner has a floating cord and the end of the cord gets plugged into the Power Supply Box. You drop the cleaner on the opposite side of the pool then the Power Supply Box. Go back to the Power Box and ON/OFF switch the box to ON position and press the reset button and the cleaner starts working.
      Can I keep the Power Supply Box by the poolside?
      –  NO!  The power supply must be placed in a dry, sheltered area at least 12 feet away from the pool. Since the Power Supply is water resistant, NOT WATER PROOF, it should not be left out in the rain or placed in puddles of water
      Why would I need the mesh filter bag?
      – For big clean ups of larger debris, such as leaves, acorns, twigs and pine needles. The fine mesh filter bag may clog up faster and require more cleanings.
      How do you know when to clean your filter bag?
      – When the Aquabot slows down so that it constantly reverses direction before reaching the sides of the pool, it is sending a signal that it is time to clean the filter bag.

      How do I clean my filter bags?
      – Simply use a garden hose to rinse it and replace.
      – For a complete cleaning, bags can be machine washed with a detergent such as “Cheer”.
      How do you remove the AQUABOT from the pool?
      – Turn off the power supply by pressing the ON/OFF switch to off. Unplug the Floating Cable from the Power Supply. Gently pull the Aquabot toward you using the Floating cable. **Removing the cleaner by its Floating cable may cause severe damage to the cable.
      – Remove the Aquabot from the water using its handle.
      – Rest the Aquabot on its side to allow water to drain from the unit.
      – Clean and re-install the filter bag. Then rest the Aquabot on its side in a dry, shaded area along with its Power Supply and properly coil the floating cable.
      Can I keep my AQUABOT in the pool?
      – No! Never leave it in the pool? The Aquabot is primarily made of plastic and rubber. The pool’s chemicals will eat away at the cleaner and cause pre-mature part deterioration.
      How do I store the AQUABOT at the end of season?
      – Thoroughly clean both filter bags, make sure that there is no water in the Aquabot, completely untangle and then properly coil the Floating Cord. Your Aquabot and Power supply should be stored in a dry, protected area.
      Learn More About Aquabot
      The Original Robotic Pool Cleaner
      with all the features to make cleaning your pool a breeze!

      • Easy to use
      • Dramatically reduces maintenance costs
      • No installation or assembly required
      • Removes algae and bacteria
      • Built-in filtration system -- completely independent of the main pool filter ... no messy hoses to deal with!
      • Cleans any size, shape and type of in-ground pool
      • Pre-programmed for efficient, thorough cleaning of your pool
      • Climbs and cleans pool sidewalls
      • Vacuums all types of debris
      • Lightweight -- operates on only 24 volts
      • Re-usable filter bag
      • Walks up and scrubs most pool steps

      Aquabot Gives You More Time To Enjoy Your Pool
      Just plug it in, drop it into your pool and turn it on ... the AQUABOT will do the rest!

      The computer-controlled Aquabot is pre-programmed to scrub, vacuum and filter dirt and debris from pool bottoms, walls, waterlines and steps ... AUTOMATICALLY! The Aquabot cleans all sizes, shapes and types of in-ground swimming pools.

      The lightweight Aquabot has its own special filtration pump and bag located inside its body and operates completely independent of your main pool filter, eliminating the need for messy, bulky hoses.

      Engineered for reliable worry-free operation, the Aquabot cannont become stuck on stairs or ladders or become tangled in hoses as with other pool cleaners. Just take the Aquabot out of the box and put it in your pool ... No Installation is required!

      Cut your summer pool bills in half! The Aquabot drastically reduces the frequency of wasteful backwashing, saving thousands of gallons of water per year and reducing your chemical consumption by as much as 30%. With the Aquabot at work in your pool, you can even decrease the running time of your pool's filtration system by as much as 60%.

      The Aquabot has front and rear scrubbing brushes which loosen and remove heavy dirt and fine particles to be vacuumed and trapped in the filter bag.

      The Aquabot has excptionally high suction power, enabling it to vacuum up all types of dirt and debris from your pool.

      The Aquabot will clean and purify thousands of gallons of water per hour. The Aquabot is equipped with an oversized, re-usable filter bag that has a large capacity to hold leaves and other debris. The filter bag can easily be removed for periodic cleaning.

      The Aquabot will scrub, vacuum and filter out all types of debris, including algae and other small particles.

      As a result of the Aquabot's heavy-duty pumping action, the pool's bottom water is circulated and forced to the surface, raising the overall water temperature and creating a more equal distribution of chemicals that would normally settle to the floor of the pool.

      Operating the Aquabot is as simple as dropping it into your pool and plugging it in. It does the rest itself. The Aquabot is safe and easy to use, operating only only 24 volts (the equivelant of three radio batteries) and costing less than about 25 cents a day to run.

      The Aquabot requires little or no maintenance. The Aqubot is constructed of corrosion-proof materials and has fewer than 10 moving parts.

      Quantity of water filtered = 4000 gals. per hour
      Cleaning Coverage = 3500 sq. ft. per hour
      Electrical Cord Length = 51 ft.
      Unit Weight = 16.9 lbs.
      Wattage = 140 Watts
      Operating Cost = Less than 25 cents per day
      Electrical Plug = 110v/60Hz or 230V/50Hz
      Filtration-Mircron Rating = Self contained 2 micron
      Scrubbing Ability = Heavy duty
      Shipping Dimensions = 17.5 in. x 17.5 in x 19.5 in.
      Shipping Weight = 36 lbs.