Delivery To Ashburn Edit

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source / Promo Code:WYAARUNKEdit

    16 x 24 ft Kayak Style Pool Rectangle Liners

      16 x 24 ft Kayak Style Pool Rectangle Liners is rated 4.25 out of 5 by 4.
      • 2016-10-24T07:11CST
      • bvseo_cps, prod_bvrr, vn_cps_3.4.0
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_4
      • loc_en_US, sid_SKU18604, PRD, sort_mostRecent
      • clientName_Intheswim
      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getAggregateRating, 128ms
      • Item: # L7510A Solid Blue - 20 Gauge Now Only! $274.49 Was $304.99
      • Item: # L7510C Boulder Swirl - 20-Gauge $349.99
      • Item: # L7510G Pacific Diamond - 20 Gauge $349.99
      • Item: # L7510R River Stone - 20 Gauge Now Only! $314.99 Was $349.99
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO
      Rated 5 out of 5 by from Perfect! Actually sent me an upgraded liner than what I ordered. Fast shipping, installed liner and all is well and we are swimming again.
      Date published: 2015-06-06
      Date published: 2015-04-27
      Rated 5 out of 5 by from Fit just fine We bought this replacement liner for our FantaSea pool. It looks great and fit just fine. We have had several people comment on how pretty and nice it looks.
      Date published: 2009-07-25
      Rated 5 out of 5 by from 100% satisfied I was delighted with my recent purchase of the 25 gauge Mystri liner for my pool. Prior to the purchase, I had a number of questions, all of which were answered promptly and to my complete satisfaction by the ITS customer reps. When I finally ordered the liner, it arrived quickly, it installed without problem and it looks great Thank again
      Date published: 2009-07-18
      • 2016-10-24T07:11CST
      • bvseo_cps, prod_bvrr, vn_cps_3.4.0
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_4
      • loc_en_US, sid_SKU18604, PRD, sort_mostRecent
      • clientName_Intheswim
      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getReviews, 0ms

      • Will only fit flat bottom above-ground pools that are 16’ x 24’ rectangle.
      • Will fit Kayak®, Fanta Sea® and Olympic® Pools.
      • Standard beaded style liner.
      • Pool liner fits a 48" sidewall.
      • Made from virgin vinyl.
      • Provide maximum protection from the sun's damaging U.V. rays.
      • 20 Gauge.
      • Rugged double welded seam

      How can I find a leak in my liner?
      - Take some food coloring and go to where you think there might be a leak, if so the food coloring will be drawn to it.
      How do I know if your liners will fit my pool?
      - Our liners have a standard bead.
      What is the lowest temperature to install a liner?
      - 60 degrees for a beaded liner and 50 degrees for an overlap liner.
      Can I stretch a liner to fit a larger size pool?
      - No, you have to match up your pool size with the same size liner.  We do have custom above ground liners to accommodate any size above ground pool.
      Installation Instructions
      • 2” gray duct tape with non-asphalted adhesive
      • screwdriver
      • garden hose
      • sharp nail or ice pick
      • industrial vacuum or household vacuum (filter bag removed)
      • tamping tool
      • masking tape
      • utility knife

        WARNING: Liner should be stored at room temperature for at least 72 hours prior to installation.


      1. Spread a 2” layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use “Soft Step” Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.

      2. With the brick sand, make a curved cove about 4” high and 4” wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used.


      1. Place the closed liner carton in the center of the pool.

      2. Open the carton. Do NOT use anything sharp to open the carton.

      3. Unfold the liner and spread it out in the sun to warm up.

      4. Inspect all seams and surfaces for holes.

      5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.

      6. Smooth out all wrinkles in the bottom.

      7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.

      8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.

      9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3” below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.

      10. Proceed filling pool until water reaches desired level.


      1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.

      2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.

      3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.
      Warranty Products
      You May Also Like...