Delivery To Ashburn Edit

FREE SHIPPINGHandling May ApplyDetails Handling May Apply

Call Cart

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source / Promo Code:I8TKBAZVEdit

    Thank you for shopping with In The Swim!

    15 x 24 ft Oval Pool Beaded Liners

      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getAggregateRating, 111ms
      • bvseo-msg: The resource to the URL or file is currently unavailable.;

    Beaded Pool Liner Gives Your Pool A Splash Of Style

    Whether you just bought a new above ground pool or you need a beaded pool liner replacement, In the Swim’s 15x24 oval beaded pool liner delivers quality and value. Made of super-strong virgin vinyl, this beaded pool liner comes in different thickness and designs so you can get what you want for your pool at a price you need for your budget. Made for Esther Williams and Johnny Weismuller brands of pools, this beaded pool liner will fit nearly any above ground pool needing a beaded liner.

    • Beaded liner comes in solid blue, boulder swirl, pacific diamond and emerald tile patterns
    • Pool liners are available for 48 in. and 52 in. tall walls; please make sure you order correct size for your pool’s wall height
    • Virgin vinyl construction in 20 gauge and 25 gauge thickness will last for years
    • 20 Gauge liner comes with a 15 year limited warranty
    • 25 Gauge liner comes with a
      • Item: # L3030A Solid Blue for 48 in. Wall
        20 Gauge
      • Item: # L3130A Solid Blue for 52 in. Wall
        20 Gauge
      • Item: # L3030C Boulder Swirl for 48 in. Wall
      • Item: # L3130C Boulder Swirl for 52 in. Wall
      • Item: # L3030G Pacific Diamond for 48 in. Wall
      • Item: # L3130G Pacific Diamond for 52 in. Wall
      • Item: # L4030G Pacific Diamond for 48 in. Wall
      • Item: # L4130G Pacific Diamond for 52 in. Wall
      • Customer Review
      • MORE INFO
      • bvseo_sdk, java_sdk, bvseo-3.1.0
      • CLOUD, getReviews, 0ms
      • bvseo-msg: The resource to the URL or file is currently unavailable.;
      Installation Instructions
      • 2” gray duct tape with non-asphalted adhesive
      • screwdriver
      • garden hose
      • sharp nail or ice pick
      • industrial vacuum or household vacuum (filter bag removed)
      • tamping tool
      • masking tape
      • utility knife

        WARNING: Liner should be stored at room temperature for at least 72 hours prior to installation.


      1. Spread a 2” layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use “Soft Step” Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.

      2. With the brick sand, make a curved cove about 4” high and 4” wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used.


      1. Place the closed liner carton in the center of the pool.

      2. Open the carton. Do NOT use anything sharp to open the carton.

      3. Unfold the liner and spread it out in the sun to warm up.

      4. Inspect all seams and surfaces for holes.

      5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.

      6. Smooth out all wrinkles in the bottom.

      7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.

      8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.

      9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3” below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.

      10. Proceed filling pool until water reaches desired level.


      1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.

      2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.

      3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.