America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Menu
Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: Ashburn Change Location

To Ashburn Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    Safety Cover Hardware

    1. 4 years ago
      good pumping rate but weak housing
      I bought this pump this fall and already used for pumping water from the cover. The hose connector is inserted into the hole in the body which has rather thin wall thickness. After few insertions the body developed a crack. Pump was operational but I was afraid that it will not leave long and glued the hose connector into the hole with PVC glue. Will see how it will last.
    2. 2 years ago
      Durable
      Second one I've bought first one was ten years old still running good
    3. 5 months ago
      Money well spent
      This is our second year of using this pump and it's still working like brand new. For the money, it's definitely a great little pump and keeps our cover clear of excess water.
    1. 4 years ago
      As advertised
      My pool is 30 years old. I have 3 types of anchors currently. As they go bad I have been switching to the Meyco screw type. The switch has been pretty easy and the Meyco anchors work great.
    2. 10 years ago
      Cover Springs
      I looked around quite a bit before finding the correct set of cover springs. The ones on my pool were starting to give out from some of the overly abundant snow we get during winter here. Originally I ordered the wrong ones and In the Swim quickly and easily refunded and exchanged them for me. The products are perfect OEM parts and the customer service rates second to none.
    3. 4 years ago
      Great Winter Cover Products
      Great stuff! Only had to replace one broken anchor and 5 springs because of the 4th largest winter northern IN had on record.
    1. 2 days ago
      A Better Block
      This product also available from another vendor, is the best of the lot. Better construction, better lid (not a perfect lid, but better)
    2. 1 decade ago
      Does the job
      Not sure why the lid catches are not more secure... They need a bit more plastic in each catch to hold the lid properly. Often, the catching mechanism is so flimsy that it's difficult to know when the lid is actually locked in place.
    3. 4 months ago
      good replacement for pool bags
      Bought a set of 12 a year ago to try them since we are tired of spending money on expensive pool bags that end up in the garbage after a year This is our second set of 12 to complete around our pool We were impressed with them last winter We did put bricks inside as well as water and used plastic ties around to ensure the tops stayed tight as we get heavy winds here
    1. 1 decade ago
      Excellent product
      I have used Pool Magic for several years now and it has proven to be an extremely effective treatment to jump start my pool opening. I also use it to close up the pool in the fall. Well worth using.
    2. 1 decade ago
      The name says it all! MAGIC!
      We use this product when closing and opening our pool. Before we started using this product we always had a water scum line when we opened the pool. The enzymes in this product break down organics, which prevent scum-line formation. No more scrubby mitt clean-up! This product makes spring clean easy and enjoyable! Highly recommend this product.
    3. 4 years ago
      Works Great
      This well be the third year that we are using POOL MAGIC. Pool has been very clear each spring opening
    1. 2 years ago
      Handy tool
      I have not used the removal/installation tool yet. I did watch a pool tech from the company that closed our pool this year and have no doubt that it will work as well as the device he used.
    2. 2 years ago
      looks like what i need
      A little shorter then my old one but it should be ok
    1. 4 years ago
      easy on-easy off
      I purched this cover as a replacement cover after being told by in the swim that it was the same as a meyco cover. IT'S NOT! Only four of my old anchors could be used. Had to rent a drill and install new anchors. The cover seems to be as good as a meyco, but I won't know for sure till after the winter is over.If it holds up as well as my meco did then it will be a great buy. Time will tell.
    2. 5 years ago
      Shocked By Results!
      So I bought this cover mate before I deployed for Iraq in late 2010 knowing my wife wouldn't open our pool for the summer of 2011. We used it under our mesh safety cover. Well, she didn't open it in 2011 and then we didn't open it in 2012. We just opened the pool (Apr. 2013) after it sitting unattended for 3-WINTERS and 2-SUMMERS and the condition of the pool is AMAZING! The water was clear, there was very little algea and debris in the pool condiersing the duration it was closed. All I have to ... read more do is vacuum the small mess on the bottom of the pool and we're back in business. It definitely blocks the sun and minimizes algae growth...when I showed my local pool shop our water they couldn't believe how clear it was. Great product! I pressure washed both sides of the cover mate, let it dry, folded it up, and put it away for next winter!
    3. 7 years ago
      Does the job - but with a catch
      I bought one of these and used it for 2 seasons. I found the water to be very clean once it was removed - but then there was the chore of cleaning and storing yet another cover. It floats but a certain amount of water does puddle in places and algae grows there, so although the pool water is clear, the cover is pretty nasty on top. I have an approximate 20'x40' lazy L, so this thing is BIG. It has bubbles on it like a solar cover, which makes it float. These bubbles mean you can't walk on it ... read more to clean, so you're forced to fold it and clean one side at a time, but then the clean side is laying where the dirty side was just previously. I have an electric pressure washer and even being very careful it would pop some bubbles, so I stopped. An RV brush was the best but still it was very awkward trying to fold and clean it. Once somewhat clean (I never was very successful), and let to dry, roll it up and put it, for us, in the basement - a 5' tall roll about 2 1/2 ft. in diameter. I gave it 3 stars because, on one hand it does keep the water clean, but on the other it did not save me time or effort. I stopped using it because I found it easier to deal with pool water cleanup than to clean and store the cover. My eventual solution was to buy a quality suction side cleaner. That simplified vacuuming and my pool cleanup is very easy. I don't even use water bags any more, even though they helped keep debris from going under the cover. That saved the time of cleaning and storing them, too. The year after buying the suction cleaner I also changed from sand to cartridge filters and cleanup is even easier (no backflushing during the cleanup time).
    1. 3 years ago
      Great product
      Brass anchors arrived on time. Easy to install in hole already there with old installation tool
    2. 12 months ago
      Great product
      I have ordered these brass anchors in the past. Great product! Strong and easy to install. Our pool cover is well anchored.
    3. 3 years ago
      Worked perfectly!
      We desperately needed these replacements and never thought we would find them. Shipped quick and replaced easily! So grateful!
    • 2018-10-17
    • bvseo_sps, prod_bvsp
    • cp_1
    • tr_20
    • loc_en_US, PRD
    • clientname_Intheswim, pc_8, tc_7
    • bvseo_sdk, java_sdk, bvseo-3.1.0
    • CLOUD, getContent, 6ms
    • SPOTLIGHTS, CATEGORY

    In The Swim Knowledge Pool: Pool Safety Cover Parts & Tools

    In The Swim's Dr. Pool

    More on Safety Pool Cover Parts & Accessories

    Pool Safety covers are the best thing going - they always look great with minimal care and cleaning, and can last for over a decade! However, safety covers do require some maintenance and parts replacement from time to time. Here we have assembled safety pool cover parts, tools and accessory items, to keep your pool safety cover in tip-top shape. In The Swim replacement parts and tools will fit all brands of safety covers by Buffalo, Cantar, GLI, HPI, Loop-Loc, Meyco and more. 


    Brass Cover Anchors: Cover anchors should be replaced if they become inoperative. Old anchors can be removed with our Brass Anchor Removal Tool, which allows you to easily leverage old cover anchors from a concrete pool deck. Simply tap the new Brass Cover Anchor into the hole with any type of hammer, using the Anchor Tamping Tool. Thread in the pin to the anchor and connect your spring. 

    Installation and Removal Tools: The main tools needed are the Cover Hex Key, a tempered steel Allen wrench of the right size to fit any brass cover anchor. Extra long hex key can be used without kneeling down, or when used horizontally, makes a fast anchor spinner. The Safety Cover Installation Rod is the second main tool that every safety cover owner needs. Notched steel tube with heavy duty handle allows for levering the strap spring over the cover anchors. For removal, twist the Installation Rod between the spring and anchor and simply lean it forward, towards the pool.

    Extension Straps and Hardware: Extension Straps are used to extend the cover straps to anchors placed off the pool deck, or beyond a planter area. The Y-Strap for safety covers is used when a diving board, fountain or other large obstruction, allowing you to connect to two anchors on either side. In this section we also have replacement stainless steel safety cover Strap Buckles and cover Strap Tips. Stainless steel rings are used in place of the cover spring, in cases where a wall is tall wall is within 15" of the pool edge.

    Specialty Anchors and Stakes: Specialty safety cover anchors are aluminum Cover Stakes that can be used in planter or grassy areas, or in paver pool decks. In this section we also have cover Wall Anchors used for installing safety covers on inground pools with raised wall or raised deck areas.

    Springs and Spring Covers: We have two sizes of safety cover strap springs, and the vinyl covers that are used to prevent the small scratches that cover springs can make on a pool deck, as it expands and contracts. Use the 4" Short Springs only in locations where there is not enough room to use the longer 8" Cover Springs.

    Storage Bags and Patch Kits: Safety Cover Storage Bag replacements for storing your safety cover safely during summer, are made of mesh cover material, with durable tie rope to cinch the bag tightly. Safety Cover Patches are made to quickly patch both solid and mesh safety pool covers with a self-adhesive heavy duty patch, 3"x8" in size, in 5 colors, and 3 types.