 |
|
|
|
 |
|
Dolphin Diagnostic Advantage Robotic Pool Cleaner |
 |
|
|
Additional Images
Warranty: 1 Year Warranty.
|
SAVE UP TO 50% ON ELECTRICITY & BACKWASHING COSTS, & UP TO 30% ON CHEMICAL COSTS!
- The Dolphin Diagnostic scrubs and vacuums the pool floor, walls and waterline and micro filters the pool water.
- Operates using an internal pump and filter system to reduce wear and tear on your main pool filter system.
- Features a reusable filter bag designed with optimum porosity to catch the smallest debris and avoid clogging. It's like adding another filter to your pool!
- Includes 65 ft. of floating power cord, with Kevlar Strengthener and a built-in self-monitoring software package.
- Recommended for pools up to 20 X 40.
|
|
Technical Specifications:
• The Dolphin Diagnostic Advantage cleans up to a 20' x 40' in-ground pool.
• This cleaner has a 3 hour cleaning cycle.
• The Dolphin scrubs and vacuums the pool floor, walls and waterline and microfilters the pool water.
• The Dolphin’s reusable filter bag is designed with the optimum porosity to catch the smallest debris yet avoid clogging.
• It operates with its own pump and filter system.
• The cleaner saves up to 50% on electricity and backwashing costs as well as up to 30% on chemicals.
• Transformer - ETL Listed 115V AC-250 Watts in Weatherproof casing, 24 Volts at Unit.
• Automatic Shut-Off After 6 Hours.
Back To The Top
Troubleshooting:
Air bubbles expelling from impeller tube or Dolphin falling backwards at waterline.
– Remove handle float and if necessary, attach 8oz weight to bottom inlet cover.
Cable twisting.
– Change handle diagonal after each use.
– Turn off filter and install main drain covering.
– Straighten cable and lay in sun periodically.
Dolphin moving in circles.
– Place power supply in a position so that Dolphin can reach all walls.
– Lock bottom lid securely.
– Check tracks are free and not stretched.
– Remove handle float and if necessary, attach 8oz weight to bottom inlet cover.
Dolphin does not climb walls.
– Empty and wash filter bag and add floats if necessary.
– Machine wash filter bag.
– Brush walls.
– Water temperature should be above 65 degrees.
Motors not working.
– Impeller blocked. Clean around impeller.
– Drive system blocked. Clean tracks and wheels.
– Electrical problems – motor unit, cable, power supply. Check cable and wall plugs and sockets.
Dolphin will not sink.
– Air caught in filter bag. Turn Dolphin upside-down under water or machine wash filter bag.
Back To The Top
Frequently Asked Questions:
How does this cleaner attach to my pool?
– This cleaner runs on its own. All you have to do is plug it in and put the cleaner in your pool. It is a self-contained cleaner.
Will this cleaner clean the walls?
– Yes, this cleaner cleans the walls, floor, and even the water line!
Where does the debris go after the cleaner picks it up?
– The cleaner has a re-usable filter bag that needs to be cleaned just about every use. Either rinsed out with a hose, or cleaned with mild dish detergent.
How long is the cord?
– The cord is 65 ft. in length.
What size pool will this cleaner clean?
– This will work for pools up to a 20 x 40 pool.
Back To The Top
|
|
http://www.intheswim.com/Pool-Equipment/Dolphin-Robotic-Pool-Cleaners/Dolphin-Diagnostic-Advantage-Robotic-Pool-Cleaner/
|
|