Source Code: WYAARUNK | June 18, 2013

SHOPPING CART

ITEMS: 0 TOTAL: $0.00

VIEW CART / CHECK OUT



	Pool Chemicals Chlorine & Bromine Start-Up Kits Pool Shock Pool Algaecides Pool Clarifiers More...



	Pool Equipment Automatic Pool Cleaners Pool Pumps & Filters Pool Heaters Salt Chlorine Generators Filter Cartridges Pool Parts More...



	Pool Liners In-Ground Liners Above Ground Liners More...



	Pool Covers Solar Blankets & Reels Winter Covers Safety Covers More...



	Pool Accessories Pool Paint Steps & Ladders For In-Ground Pools Steps & Ladders For Above Ground Pools Pool Slides Pool Chairs & Lounges More...



	Above Ground Pools Intex Softsided Pools Steel Wall Pools



	In-Ground Pools



	Spa & Hot Tub Portable Spas & Hot Tubs Spa Cartridges Spa Covers Spa Chemicals More...


	Ice Rinks


	Backyard & Home

Home > Pool Accessories > Paint Accessories

« Previous Item Next Item »

Epoxy Primer

Warranty:

ENSURES A LASTING, CERAMIC-LIKE FINISH!

This top-of-the-line Epoxy Primer is required for resurfacing smooth plaster, smooth concrete or gel-coat pools.
Designed for use with our Poxy Shield Paints - this quality primer can even be applied when the surface is damp!
It is recommended that the pool's surface be thoroughly cleaned with surface cleaner before using any primer or paint.

Qty.

Item No.

Description

ONLY!

A7720

Epoxy Primer (1 gallon)

$69.99

Coverage: Approximately 200 square feet per gallon

A7799

Surface Cleaner 4 lbs.

$24.99

Technical Specifications:

For surface preparation:
     – Wash the pool with Tri-Sodium Phosphate. DO NOT use a soap-type detergent. It can leave a flim on the surface which will result in poor paint adhesion.
     – Acid etching is required on bare masonry surfaces like concrete or plaster. It is also effective for removing chalky residue and hard mineral deposits on a previously painted pool.
     –We highly recommend repeating STEP 1: Wash the surface again with the tri-sodium phosphate solution to neutralize any remaining acid on the surface.

Back To The Top

Frequently Asked Questions:

What kind of surface can the Epoxy Primer be used on?
– The Epoxy Primer can be used on most smooth surfaces. It can also be used on bare plaster or bare concrete, but can not be used on fiberglass. If the customer has a fiberglass pool they must use the Gunite Primer.

What is the coverage on the Epoxy Primer?
– The Epoxy Primer coverage is 200 square feet per gallon.

Can this primer be applied to a wet surface?
– YES, the Epoxy Primer can be applied to a slightly wet surface.

How to Calculate the Square Footage of a Pool:
1. Identify the shape of the pool - SEE BELOW
2. Use the formula given to calculate the pool square footage.
3. Divide the pools square footage by the sq. ft. per gallon of the desired paint to determine how many gallons of paint are needed.

Pool Shape	Formula
Rectangular	Length x Width x 1.5 = Total Square Feet
Oval	Length x Width x 1.65 = Total Square Feet
Roman	Length x Width x 1.55 = Total Square Feet
Lazy L	Length x Width x 1.65 = Total Square Feet
Free Form	Length x Width x 1.6 = Total Square Feet

Back To The Top